Geothermal heat pump (ground water, brine water) with a thermal capacity of 17 kW (at 0 ° C from the ground and +35 ° C on heating) has modes of heating, cooling, hot water preparation. Heat pump of this capacity can heat/cool a small building or room from 50 m2 to 120 m2, depending on the Turea building (house, premises), heating system technology (floor heating, radiators, convectors), thermal insulation, the location of the building (on a hill, lowland) and other design features, the necessary volume of hot water, etc.
The given model is issued in one Compressor variant, also there is a possibility of feeding pressure from 220В or 380В (call and specify), the heat pump starts in the unloaded mode that does start more softly and sparingly. The system is equipped with copper brazed plate heat exchangers made of food grade stainless steel and have 30% more plates than the design need for operation in a very wide range. Adjustment is carried out by the electronic expansion valve, the control and automatics on the basis of the controller on the basis of the CPU with high productivity, the control panel colour touch screen display in the size 4.3 inch. There is a possibility of external control, you can also control another device. In addition, high pressure and low pressure pressure pressure gauges are installed for the operative control of the system status. The presence of the sight glass allows to observe the processes inside the Refrigerant circuit. Scroll Compressors used in this system are designed for operation in heat pumps and have high Efficiency. More detailed information about the principle of operation of the heat pump, varieties and other features can be found here: